M.-Ch. Pan, P.-Ch. Lee and Y.-R. Cheng, 2008, “Remote Online Machine Condition Monitoring System,” (in press) Measurement.

M.-Ch. Pan and M.-D. Wu, 2008, “Dynamic Investigation and Adaptive Tracking-Error Improvement of Optical Disk Drives” (in press), Journal of the Chinese Society of Mechanical Engineers. (EI)

M.-Ch. Pan and Ch.-X. Wu, 2008, “Extended Angular-Velocity Vold-Kalman Order Tracking,” (in revision) Transactions of ASME, Journal of Vibration and Acoustics.

M.-Cheng Pan, Ch.-H. Chen, L.-Y. Chen, M.-Chun Pan* and Y.-M. Shyr, 2008, “Highly-resolved Diffuse Optical Tomography: A Systematical Approach Using High-pass Filtering for Value- preserved Images,” (in press) Journal of Biomedical Optics. (* corresponding author)

M.-Chun Pan, Ch.-H. Chen, M.-Cheng Pan and Y.-M. Shyr, 2008, “Near Infra-red Tomographic Imaging System Based on a Highly Angular Spatial-Resolution Mechanism－ Design, Calibration, and Performance,” (in revision) Measurement. (SCI, EI)

M.-Cheng Pan, Ch.-H. Chen, M.-Chun Pan* and Y.-M. Shyr, 2008, “Approach to Accurately Estimating Low-Contrast Inclusion with a priori Guidance in Near-infrared Diffuse Optical Tomography,” (in press) Journal of the Chinese Institute of Engineers. (SCI, EI; * corresponding author)

H.-B. Zhuang, M.-C. Pan and S.-Y. Lee, 2007, “Irregular Bone-Effect Discrimination of Dental Implements with an In-vitro Model by Resonance Frequency Analysis,” Journal of Biomechanics, Vol.40, Issue S2, p.S562. (SCI, EI)

M.-Ch. Pan and Ch.-X. Wu, 2007, “Adaptive Vold-Kalman Filtering Order Tracking,” Mechanical System and Signal Processing, Vol.21, Issue 8, pp.2957-2969. (SCI, EI)

M.-Ch. Pan and B.-Ch. Chen, 2007, “Drop Simulation/Experimental Verification and Shock Resistance Improvement of TFT-LCD Monitors,” Microelectronics Reliability, Vol.47, Issue 12, pp. 2249-2259. (SCI, EI)

M.-Ch. Pan, W.-H. Huang, Y.-L. Shih and M.-Cheng Pan, 2007, “Pseudo-Model Technique of Biological Tissues for the Development of NIR Diffuse Optical Tomography” Journal of the Chinese Institute of Engineers, Vol.30, No.2, pp.189-201. (SCI, EI)

M.-Ch. Pan, Sh.-W. Liao and Ch.-Ch. Chiu, 2007, “Improvement on Gabor Order Tracking and Objective Comparison with Vold-Kalman-Filtering Order Tracking,” Mechanical Systems and Signal Processing, Vol.21, No.2, pp.653-667. (SCI, EI)

M.-Ch. Pan and W.-T. Wei, 2006, “Adaptive Focusing Control of DVD Drives in Vehicle Systems,“ Journal of Vibration and Control, Vol.12, No.11, pp. 1239-1250. (SCI, EI)

M.-Ch. Pan and Sh.-W. Liao, 2006, “Biomedical Signal Reconstruction using Gabor Spectral tracking Technique,” International Journal of Information Acquisition, Vol.3, No.1, pp.1-7.  (NSC-92-2212-E-008-025)

M.-Ch. Pan and Ch.-Ch. Chiu, 2006, “Investigation on Improved Gabor Order Tracking Technique and Its Applications,” Journal of Sound and Vibration, No.295, pp.810-826. (SCI, EI)

M.-Ch. Pan and Y.-F. Lin, 2006, "Further Exploration of Vold-Kalman-Filtering Order Tracking with Shaft-Speed Information – (I) Theoretical Part, Numerical Implementation and Parameter Investigation," Mechanical Systems and Signal Processing, Vol. 20 No. 5, pp.1134-1154. (SCI, EI)

M.-Ch. Pan and Y.-F. Lin, 2006, " Further Exploration of Vold-Kalman-Filtering Order Tracking with Shaft-Speed Information – (II) Engineering Applications," Mechanical Systems and Signal Processing, Vol.20, No.6, pp1410-1428. (SCI, EI)

M.-Ch Pan and J.-Y. Huang, 2004, “Dynamic Interpretation of Transmission Systems Using Advanced Time-Frequency Representation,” Journal of the Chinese Institute of Engineers, Vol.27, No.7, pp.1087-1092. (SCI, EI)

M. Pan, J.-X. Chen, 2003, “Transmission Noise Identification Using Two-Dimensional Dynamic Signal Analysis,” Journal of Sound and Vibration, No.262, pp.117-140. (SCI, EI)

M. Pan, P. Sas and H. Van Brussel, 2003, “Machine Condition Monitoring Using Signal Classification Techniques,” Journal of Vibration and Control, Vol.9, No.10, pp.1103-1120. (SCI, EI)

M.-Ch. Pan, Y.-S. Chiang and M.-H. Huang, 2003, “Preliminary Study on Speed Evaluation and Impact Configuration Reconstruction of Vehicles with Man-Machine Interactive Programming,” Forensic Science Journal, Vol.2, No.1, pp.5-16.

M.-Ch. Pan and H.-J. Lin, 2002, “Investigation of Dynamic Characteristics on Two Types of Electrical Scooters,” Journal of the Chinese Society of Mechanical Engineers, Vol.23, No.4, pp.367-381. (EI)

M.-Ch. Pan, 2002, “Integrated Study of Time-Frequency Representations and Their Applications in Source Identification of Mechanical Noise,” JSME International Journal – Series C: Mechanical Systems, Machine Elements and Manufacturing, Vol.45, No.3, pp.665-672. (SCI, EI)

M.-Ch. Pan, and T. Shieh, 2002, “Design Modification for Reducing Silent Chain Annoying Noise,” Transactions of ASME, Journal of Mechanical Design, Vol. 124, No.4, pp.822-827. (SCI, EI)

M.-Ch. Pan, W. Lu and T. Shieh, 2002, “CVT Belt Noise of Scooters,” International Journal of Vehicle Design, Vol.30, No.3, pp.238-250. (SCI, EI)

M.-Ch. Pan, H. Van Brussel, and P. Sas, 1998, "Intelligent Joint Fault Diagnosis of Industrial Robots", Mechanical Systems and Signal Processing, Vol.12, No.4, pp.571-588. (SCI, EI)

M.-Ch. Pan, H. Van Brussel, P. Sas and B. Verbeure, 1998, "Fault Diagnosis of Joint Backlash", Transactions of ASME, Journal of Vibration and Acoustics, Vol.120, No.1, pp.13-24. (SCI, EI)

Lee, R. S., T.-C Chen and M.-Ch. Pan, 1996, "Evaluation for Preform Design of Stepped Forging Part by Coupled Thermoviscoplastic Finite Element Analysis and Visioplasticity", Journal of Materials Processing Technology, Vol.57, pp.278-287. (SCI, EI)