A.I. Application

Faculty

Lee, Ju-Yi

Professor & Chair of Department of Mechanical Engineering & Director of Institute of Energy

Contact Information

Office：E2-403
Tel：03-4267307
Campus Extension：34307
Fax：03-4254501
E-mail：juyilee@ncu.edu.tw

Expertise Introduction

雷射干涉術
白光干涉術
光電技術與量測
光電信號處理
Optical Metrology, Precise Positioning, Surface Plasmon Resonance Sensing.

Chen, Yi-Cheng

Professor & Associate Chair of Department of Mechanical Engineering

Contact Information

Office：E4-463
Tel：03-4267313
Campus Extension：34313
Fax：03-4254501
E-mail：ethan@cc.ncu.edu.tw
Laboratory Website：光機設計分析實驗室

Expertise Introduction

(1) 齒輪設計與分析: 齒形設計，負載下齒面接觸分析，靜動態傳動誤差，動態特性與訊號處理，最佳化設計，齒輪刀具設計，諧波齒輪設計。
(2) 光機整合分析與最佳化設計: 光學機構設計、鏡頭光機整合分析、大口徑反射鏡減重分析與最佳化設計、撓性結構設計、太陽能光電系統聚光模組設計與分析。
(3) 光機電系統研發: 光學式齒輪檢測系統、晶圓傳輸機械手臂系統、晶圓定位系統、自動化光學檢測
(A) Gear Design and Analysis: Gear geometry, Loaded Tooth Contact Analysis, Signal Processing of Static and Dynamic Transmission Errors, Dynamic Behavior of Gears, Optimum Design, Design of Gear Cutting Tools, Harmonic Drive.
(B) Integrated Opto-Mechanical Analysis and Optimum Design: Opto-Mechanical System Design, Lightweight Design and Optimal Design of Large Reflective Mirrors, Flexure Mounting Design, Design of Solar Concentrator for HCPV (High Concentration PhotoVoltaic),
(C) Development of Opto-Mechatronic System: Optical Measurement System of Gear Profile Error, Wafer Transfer Robot, Wafer Positioning System, Automatic Optical Inspection

Lin, Chih-Kuang

Professor & Incumbent Director

Contact Information

Office：E4-261
Tel ：03-4267340
Campus Extension：34340
Fax：03-4254501
E-mail：t330014@cc.ncu.edu.tw
Laboratory Website：疲勞與破壞實驗室

Expertise Introduction

疲勞與破壞、高溫潛變、應力分析、材料機械性質、元件破損分析、燃料電池結構強度分析、軟性電子導電與封裝薄膜機械行為、銲接熱應力分析、雷射製程與積層製造熱應力分析、MOCVD磊晶腔體及晶圓熱應力分析、顆粒體機械行為分析、儲氫合金罐結構設計與變形分析、太陽能發電系統追日機構結構變形分析

Fatigue, Fracture, Creep, Stress Analysis, Mechanical Properties of Materials, Failure Analysis, Structural Integrity of Fuel Cell Components, Mechanical Behavior of Conductive and Encapsulation Thin Films in Flexible Electronics, Thermal Stress in Welding, Thermal Stress in Laser Processing and Additive Manufacturing, Thermal Stress Analysis of MOCVD Reactor and Wafer, Mechanical Behavior of Granular Materials, Design and Deformation Analysis of Metal Hydride Reaction Vessel, Stress and Deformation Analysis of Solar Tracker

Tung, Pi-Cheng

Professor

Contact Information

Office：E2-210
Tel：03-4267304
Campus Extension：34304
Fax：03-4254501
E-mail：t331166@ncu.edu.tw

Expertise Introduction

非線性動力與振動(Vibration and Noise Analysis)
系統控制(Automatic Control)
機電整合(Mechatronics)

Ho, Jeng-Rong

Profeesor

Contact Information

Office：E4-267
Tel：03-4267309
Campus Extension：34309
Fax：03-4254501
E-mail：jrho@ncu.edu.tw

Expertise Introduction

熱傳流體力學; 熱流計算數值模型; 雷射精密製程與材料處理; 薄膜製程與圖案技術; 有機軟性電子與光電元件製程: 薄膜電晶體 (OTFTs)、太陽能電池 (OPVs)、發光二極體 (OLEDs &PLEDs)
Transport Phenomena of Heat and Fluids; Computational Modeling of Heat Transfer and Fluid Dynamics; Laser Machining, Fabrication, and Material Processing; Thin Film Fabrication and Patterning Technologies; Fabrication of Flexible Electronics and Opto-electronics (OTFTs, OPVs, OLEDs and PLEDs)

Pan, Min-Chun

Profeesor

Contact Information

Office：E4-465
Tel：03-4267312
Campus Extension：34312
Fax：03-4254501
E-mail：pan_minc@cc.ncu.edu.tw
Laboratory Website：感測監測暨診斷評估實驗室

Expertise Introduction

感測技術(Sensing Technology)、機械故障診斷暨監測(Monitoring/Diagnostics/Prognostics of Mechanical Systems)、生醫機械訊號處理(Biomedical and Mechanical Signal Processing)、擴散光學斷層造影(Diffuse Optical Imaging)、醫療器材開發(Medical Devices Design and Implementation)

Lin, Chih-Yang

Professor

Contact Information

Office：E4-464
Tel：03-4267318
Campus Extension：34318
Fax：03-4254501
E-mail：andrewlin2011@gmail.com
Laboratory Website：https://sites.google.com/view/yzucvit/home

Expertise Introduction

Computer Vision, Image Processing, Deep Learning, Machine
Learning, Signal Processing, Automatic Optic Inspection (AOI)

Liao, Chao-Yaug

Associate Professor

Contact Information

Office：E4-365
Tel：03-4267346
Campus Extension：34346
Fax：03-4254501
E-mail：cyliao@ncu.edu.tw

Expertise Introduction

雙光子聚合微製造、CADCAM、積層製造(3D列印)、逆向工程、人工智慧專家系統

Micro-forming, Two-photon Polymerization, CADCAM, Additive Manufacturing, Reverse Engineering, Artificial IntelligenceExpert System

Chung, Chen-Yuan

Associate Professor

Contact Information

Office：E2-412
Tel：03-4267331
Campus Extension：34331
Fax：03-4254501
E-mail：cychung@ncu.edu.tw

Expertise Introduction

肌骨生物力學(Musculoskeletal biomechanics)、CAE二次開發(Secondary development of CAE)、射出成型(Injection molding)

Lin, Chin-Te

Assistant Professor

Contact Information

Office：E4-253
Tel：03-4267379
Campus Extension：34379
Fax：03-4254501
E-mail：chintelin@ncu.edu.tw

Expertise Introduction

物聯網製造(IoT-based manufacturing)*
訊號處理(Digital Signal Process)*
軟體工程(Software Engineering)*
最佳設計(Numerical Optimization)
專利工程(Patent Engineering)
有限元素分析(Finite Element Analysis)
電腦輔助設計(Computer-aided Design)

Lin, Yuan-Ting

Assistant Professor

Contact Information

Office：E4-461
Tel：034267323
Campus Extension：34323
Fax：03-4254501
E-mail：yuanting@ncu.edu.tw

Expertise Introduction

人工智慧與應用、機電系統整合、系統動態與控制、車輛動態與控制

Chen, Hsiang-Chieh

Assistant Professor

Contact Information

Office：E4-464
Tel：03-4267396
Campus Extension：34396
Fax：03-4254501
E-mail：hcchen@cc.ncu.edu.tw

Expertise Introduction

電腦視覺(computer vision)、智慧型機器人(intelligent
robotics)、多軸飛行器(drone)、人工智慧應用(AI applications)

Lee, Shyong

Project Professor

Contact Information

Office：E2-203
Tel：03-4267360
Fax：03-4254501
E-mail：shyong@cc.ncu.edu.tw

Expertise Introduction

機械設計製造(Mechanical design&manufacture)
材料機械性質(Mechanical behavior)
鋁鎂合金之研究(Mg, Al, Ti, Fe Alloys’ Manufacturing )
超塑成型(Superplasticity & Superplastic Forming)