Faculty
Lin, Chih-Kuang
Professor & Incumbent Director
Contact Information
Office：E4-261
Tel ：03-4267340
Campus Extension：34340
Fax：03-4254501
E-mail：t330014@cc.ncu.edu.tw
Laboratory Website：疲勞與破壞實驗室
Expertise Introduction
疲勞與破壞、高溫潛變、應力分析、材料機械性質、元件破損分析、燃料電池結構強度分析、軟性電子導電與封裝薄膜機械行為、銲接熱應力分析、雷射製程與積層製造熱應力分析、MOCVD磊晶腔體及晶圓熱應力分析、顆粒體機械行為分析、儲氫合金罐結構設計與變形分析、太陽能發電系統追日機構結構變形分析
Fatigue, Fracture, Creep, Stress Analysis, Mechanical Properties of Materials, Failure Analysis, Structural Integrity of Fuel Cell Components, Mechanical Behavior of Conductive and Encapsulation Thin Films in Flexible Electronics, Thermal Stress in Welding, Thermal Stress in Laser Processing and Additive Manufacturing, Thermal Stress Analysis of MOCVD Reactor and Wafer, Mechanical Behavior of Granular Materials, Design and Deformation Analysis of Metal Hydride Reaction Vessel, Stress and Deformation Analysis of Solar Tracker
Hwang, Jiun-Ren
Professor
Contact Information
Office：E4-266
Tel：03-4267314
Campus Extension：34314
Fax：03-4254501
E-mail：jrhwang@ncu.edu.tw
Expertise Introduction
- 疲勞與破壞 (Fatigue and Fracture)
- 複合材料 (Composite Materials)
- 結構耐久評估 (Structural Durability Analysis)
- 車輛工程 (Vehicle Engineering)
Huang, Yi-Mei
Professor
Contact Information
Office：E4-367
Tel：03-4267345
Campus Extension：34345
Fax：03-4254501
E-mail：t330005@ncu.edu.tw
Expertise Introduction
- 振動(Vibration)
- 聲學(Acoustics)
- 振動控制(Vibration control)
- 噪音控制(Noise control)
- 動態系統設計 (Dynamic system design)
Fuh, Yiin-Kuen
Profeesor
Contact Information
Office：E4-268
Tel：03-4267305
Campus Extension：34305
Fax：03-4254501
E-mail：mikefuh@ncu.edu.tw
Expertise Introduction
- 適應性光學系統應用 (Adaptive optics and applications in opto-mechatronics systems)
- 近場電紡織技術製備微奈米纖維及奈米流道、可撓透明電極 (Near-field electrospinning and applications in nanogenerators,nanofluidics, transparentflexible electrodes and biocompatibleguided matrix, etc.)
- 微機電製程及設計 (MEMS, RF MEMS)
- 壓電材料及元件設計 (Piezoelectrics materials and devices development)
- 冷凍空調及消防工程 (HVAC and fire equipment codes in Taiwan, licensed Taiwan professional engineer in both fields)
- 金屬成型 (Metal forming, esp. precision forging processes (cold,warm & hot), hydroforming, superplastic forming etc.)
Tsao, Chia-Wen
Professor
Contact Information
Office：E4-366
Tel：03-4267343
Campus Extension：34343
Fax：03-4254501
E-mail：cwtsao@ncu.edu.tw
Expertise Introduction
微流體 、質譜分析技術、納米系質譜分析技術、 微流體生物反應器設計、微奈米製造、 微奈米技術、塑膠微加工技術、生物晶片、生物感測技術、微流體強化石油開採技術、微機電系統
Microfluidics、Mass Spectrometry、Nanostructured silicon mass spectrometry analysis、Microfluidic bioreactors design、Micro Nano Technology、Polymer Microfabrication、Lab-on-a-chip、Biosensor、Micorfluidic model oil enhanced oil recovery、Microelectricalmechanical systems (MEMS)
Wu, Yu-Ren
Professor
Contact Information
Office：E4-264
Tel：03-4267332
Campus Extension：34332
Fax：03-4254501
E-mail：yurenwu@ncu.edu.tw
Expertise Introduction
螺桿壓縮機＆真空泵之幾何設計、齒輪及齒輪刀具設計、齒輪加工方法、機械動力模擬及分析、轉子-軸承系統設計及振噪診測、工程最佳化、田口法＆均勻實驗設計法、專利開發＆創意性產品設計方法
Geometric Design of Screw Compressors and Vacuum Pumps; Gear and Gear Cutter Design and Gear Machining Methods; Multi-body Dynamics Modeling; Design and NVH Analysis of Rotor-Bearing System; Engineering Optimization; Taguchi Method and Uniform Design; Inventive Patent Development and Creative Design Method
Chen, Yi-Cheng
Professor & Associate Chair of Department of Mechanical Engineering
Contact Information
Office：E4-463
Tel：03-4267313
Campus Extension：34313
Fax：03-4254501
E-mail：ethan@cc.ncu.edu.tw
Laboratory Website：光機設計分析實驗室
Expertise Introduction
(1) 齒輪設計與分析: 齒形設計，負載下齒面接觸分析，靜動態傳動誤差，動態特性與訊號處理，最佳化設計，齒輪刀具設計，諧波齒輪設計。
(2) 光機整合分析與最佳化設計: 光學機構設計、鏡頭光機整合分析、大口徑反射鏡減重分析與最佳化設計、撓性結構設計、太陽能光電系統聚光模組設計與分析。
(3) 光機電系統研發: 光學式齒輪檢測系統、晶圓傳輸機械手臂系統、晶圓定位系統、自動化光學檢測
(A) Gear Design and Analysis: Gear geometry, Loaded Tooth Contact Analysis, Signal Processing of Static and Dynamic Transmission Errors, Dynamic Behavior of Gears, Optimum Design, Design of Gear Cutting Tools, Harmonic Drive.
(B) Integrated Opto-Mechanical Analysis and Optimum Design: Opto-Mechanical System Design, Lightweight Design and Optimal Design of Large Reflective Mirrors, Flexure Mounting Design, Design of Solar Concentrator for HCPV (High Concentration PhotoVoltaic),
(C) Development of Opto-Mechatronic System: Optical Measurement System of Gear Profile Error, Wafer Transfer Robot, Wafer Positioning System, Automatic Optical Inspection
Chung, Yun-Chi
Professor
Contact Information
Office：E4-262
Tel：03-4267315
Campus Extension：34315
Fax：03-4254501
E-mail：ycchung123@ncu.edu.tw
Expertise Introduction
(1) Discrete Element Method (DEM) (2) Joint DEM-FEM modelling (3) Combined DEM-CFD modelling (4) Coupled DEM-MBD modelling (5) Granular Mechanics (6) Solid Mechanics (7) Structural Mechanics
Tsai, Shyi-Jeng
Associate Professor
Contact Information
Office：E2-119
Tel：03-4267301
Campus Extension：34301
Fax：03-4254501
E-mail：sjtsai@cc.ncu.edu.tw
Expertise Introduction
1. 產品設計方法 (減速機設計自動化，設計行為研究，社會創新設計)；
2. 機械與機構設計 (產業設備與模組設計，探空火箭回收艙機構設計)；
3. 齒輪傳動設計(行星齒輪傳動機構，翻u針輪傳動機構，粉末冶金齒輪，錐形齒輪重負載設計)
Machine and Mechanism Design, Product Design, Gear Engineering
Chung, Chen-Yuan
Associate Professor
Contact Information
Office：E2-412
Tel：03-4267331
Campus Extension：34331
Fax：03-4254501
E-mail：cychung@ncu.edu.tw
Expertise Introduction
肌骨生物力學(Musculoskeletal biomechanics)、CAE二次開發(Secondary development of CAE)、射出成型(Injection molding)
Térence Essomba
Associate Professor
Contact Information
Office：E4-460
Tel：03-4267303
Campus Extension：34303
Fax：03-4254501
E-mail：tessomba@cc.ncu.edu.tw
Lab. Website：Medical Assistance Robotic System Laboratory. (MARS Lab.)
Expertise Introduction
Mechanical design of medical robots
Optimal mechanism synthesis
Mechatronic design of medical devices
Instrumentation of medical tools
Data measurement experiments
Liao Chan-Yi
Assistant Professor
Contact Information
Office：E2-406
Tel：03-4227151
Campus Extension：34394
Fax：03-4254501
E-mail：chanyi@ncu.edu.tw
Expertise Introduction
彈性力學、固體力學、波動力學、振動分析、板殼理論、流體-固體耦合動態分析(FSI)、振動噪音檢測、光學量測
DEPARTMENT OF MECHANICAL ENGINEERING, NATIONAL CENTRAL UNIVERSITY
TEL : 886-3-4267300
FAX：886-3-4254501
EMAIL : NCU4300@NCU.EDU.TW
ADD : No. 300, Zhongda Rd., Zhongli District, Taoyuan City 32001, Taiwan (R.O.C.)
Privacy Policy Statement